RAFT Dispersion Polymerization of Benzyl Methacrylate
in Silicone Oil Using a Silicone-Based Methacrylic Stabilizer Provides
Convenient Access to Spheres, Worms, and Vesicles
Posted on 2020-02-20 - 18:33
Reversible addition–fragmentation
chain transfer (RAFT) solution polymerization of 3-[tris(trimethylsiloxy)silyl]
propyl methacrylate (SiMA) was conducted in toluene to prepare three
PSiMA precursors with mean degrees of polymerization (DP) of 12, 13,
or 15. Each precursor was then chain-extended in turn via RAFT dispersion
polymerization of benzyl methacrylate (BzMA) in a low-viscosity silicone
oil (decamethylcyclopentasiloxane, D5). 1H NMR studies
confirmed that such polymerizations were relatively fast, with more
than 99% BzMA conversion being achieved within 100 min at 90 °C.
Moreover, gel permeation chromatography analysis indicated that these
polymerizations were well controlled, with dispersities remaining
below 1.25 when targeting PBzMA DPs up to 200. A phase diagram was
constructed at a constant copolymer concentration of 20% w/w. Only
spherical micelles were accessible when the PSiMA15 stabilizer
was utilized, as determined by transmission electron microscopy and
small-angle X-ray scattering (SAXS) studies. Nevertheless, these spheres
exhibited narrow size distributions and tunable z-average diameters ranging between 19 and 49 nm, as determined by
dynamic light scattering. In contrast, spheres, worms, or vesicles
could be prepared depending on the target PBzMA DP when utilizing
the relatively short PSiMA12 precursor. Moreover, each
of these nano-objects could be obtained at copolymer concentrations
as low as 5% w/w. To obtain more detailed structural information,
these spheres, worms and vesicles were further characterized by SAXS.
PSiMA12-PBzMA55 worms formed reasonably transparent
free-standing gels when prepared at copolymer concentrations as low
as 5% w/w and exhibited an elastic modulus (G′)
of 90 Pa at 25 °C, as judged by oscillatory rheology studies.
Finally, broadening of the molecular weight distribution was observed
during the long-term storage of PSiMA-PBzMA dispersions at ambient
temperature. We tentatively suggest that this instability is related
to hydroxyl impurities in the SiMA, which leads to cross-linking side
reactions. This problem also causes incipient flocculation of the
spheres and worms during the long-term storage of such dispersions
at 20 °C.
CITE THIS COLLECTION
DataCiteDataCite
No result found
Rymaruk, Matthew J.; O’Brien, Cate T.; Brown, Steven L.; Williams, Clive N.; Armes, Steven P. (2020). RAFT Dispersion Polymerization of Benzyl Methacrylate
in Silicone Oil Using a Silicone-Based Methacrylic Stabilizer Provides
Convenient Access to Spheres, Worms, and Vesicles. ACS Publications. Collection. https://doi.org/10.1021/acs.macromol.9b02697