American Chemical Society
am5b11175_si_004.avi (3.52 MB)

Creasable Batteries: Understanding Failure Modes through Dynamic Electrochemical Mechanical Testing

Download (3.52 MB)
posted on 2016-01-07, 00:00 authored by Aaron J. Blake, Ryan R. Kohlmeyer, Lawrence F. Drummy, Jacob S. Gutiérrez-Kolar, Jennifer Carpena-Núñez, Benji Maruyama, Reza Shahbazian-Yassar, Hong Huang, Michael F. Durstock
Thin-film batteries that can be folded, bent, and even repeatedly creased with minimal or no loss in electrochemical performance have been demonstrated and systematically evaluated using two dynamic mechanical testing approaches for either controlled bending or creasing of flexible devices. The results show that mechanically robust and flexible Li-ion batteries (Li4Ti5O12//LiFePO4) based on the use of a nonwoven multiwalled carbon nanotube (MWNT) mat as a current collector (CC) exhibited a 14-fold decrease in voltage fluctuation at a bending strain of 4.2%, as compared to cells using traditional metal foil CCs. More importantly, MWNT-based full-cells exhibited excellent mechanical integrity through 288 crease cycles, whereas the foil full-cell exhibited continuously degraded performance with each fold and catastrophic fracture after only 94 folds. The enhancements due to MWNT CCs can be attributed to excellent interfacial properties as well as high mechanical strength coupled with compliancy, which allow the batteries to easily conform during mechanical abuse. These results quantitatively demonstrate the substantial enhancement offered in both mechanical and electrochemical stability which can be realized with traditional processing approaches when an appropriate choice of a flexible and robust CC is utilized.