Green, Low-Cost, User-Friendly, and Elastomeric (GLUE) Microfluidics
journal contributionposted on 20.02.2020, 16:40 by Nicholas C. Speller, Giorgio Gianini Morbioli, Michael E. Cato, Zachary A. Duca, Amanda M. Stockton
Micro total analysis systems (μTAS) are highly attractive across numerous fields including science, engineering, and medicine due to their portability, low power use, and efficient sample and reagent consumption. Development of fully functional microfluidic devices is based on iterative design and testing of multiple prototype microdevices, and the use of hazardous conventional microfabrication methods makes this iterative process resource-intensive and prohibitive for many users worldwide. Rapid prototyping techniques can alleviate these issues, enabling accelerated development of microfluidic structures at reduced costs, making this technology available to a broader user base, from classrooms to researchers in laboratories with limited resources. Here, we present a green, low-cost, user-friendly elastomeric (GLUE) rapid prototyping method to fabricate custom master molds for polydimethylsiloxane (PDMS)-based microfluidic devices, using an application of water-soluble poly(vinyl acetate) (PVAc) glue. The smallest features of the molds are on the order of 80 μm wide, with tunable height control from 10 to 60 μm. This method is capable of fabricating three-dimensional features. As a proof of concept, several microfluidic devices ranging from a droplet generator to a lifting gate pneumatic microfluidic processor were fabricated to demonstrate the versatility and applicability of our method. To the best of our knowledge, this is the first rapid prototyping process that can be used either as a print-and-peel method or as a scaffolding technique using the same process and patterning material. The simplicity and inexpensive nature of this application of PVAc glue can significantly improve the development of integrated μTAS devices, while also making microfluidics greener and accessible to researchers with limited resources and little to no experience in the field.