jp3c04112_si_001.pdf (761.47 kB)
Fabrication of a Red-Sensitive Heterojunction Photodetector by Using a Narrowband Organic Dye
journal contributionposted on 2023-09-19, 03:03 authored by Swati Suman, Sandeep Dahiya, Ravi P. Jaiswal, Parasuraman Swaminathan, Bhola N. Pal
Narrowband photodetectors in the visible region are in demand for different applications, such as image sensors. In this work, a narrowband photodetector is fabricated by coating a red-sensitive organic dye (squaraine, SQ2) on top of a metal oxide heterojunction consisting of zinc oxide (ZnO) and titanium oxide (TiO2). The formation of the heterojunction helps in effective charge separation at the interface, which in turn improves the overall sensitivity of the photodetector. Electrical characterization studied under light illumination and external quantum efficiency measurements reveal that the photodetector has selective sensitivity in the red region with a peak position at 650 nm and full width at half-maximum of 116 nm. The device shows a significantly low dark current (1.72 nA under 10 V bias) with a detectivity of 2.57 × 1010 Jones (under 1 V external bias). These characteristics suggest that squarylium dye-based red-light photodetectors are suitable for visible light communication and other narrowband photoelectric applications such as image sensors.
electrical characterization studiedeffective charge separation57 × 1010 v biassensitive organic dyenarrowband photoelectric applications10 supvisible light communicationsensitive heterojunction photodetectorvisible regionsquarylium dyenarrowband photodetectorheterojunction helpsdifferent applicationslight photodetectorslight illuminationzinc oxideturn improvestitanium oxideselective sensitivitypeak positionoverall sensitivityimage sensorsfull widthdevice showscharacteristics suggest72 na650 nm116 nm