nz6b00609_si_001.pdf (2.56 MB)

Engineered Interfaces in Hybrid Ceramic–Polymer Electrolytes for Use in All-Solid-State Li Batteries

Download (5.37 MB)
journal contribution
posted on 09.12.2016, 00:00 by Parameswara Rao Chinnam, Stephanie L. Wunder
Composites of inorganic lithium ion conducting glass ceramics (LICGCs) and organic polymers may provide the best combination of properties for safe solid separators in lithium or lithium ion batteries to replace the currently used volatile liquid electrolytes. A key problem for their use is the high interfacial resistance that develops between the two, increasing the total cell impedance. Here we show that the application of a thin conformal SiO2 coating onto a LICGC followed by silanization with (CH3CH2O)3–Si–(OCH2CH2)–OCH3 in the presence of LiTFSI results in good adhesion between the SiO2 and the LICGC, a low resistance interface, and good wetting of Li0. Further, the cross-linked polymer formed on the surface of the silanated SiO2 interface formed from excess (CH3CH2O)3–Si–(OCH2CH2)–OCH3 prevents corrosion of the LICGC by Li0 metal. The use of SiO2 as a “glue” enables compatibilization of inorganic ceramics with other polymers and introduction of interfacial pendant anions.