Effects of Heat Setting on the Morphology and Performance of Polypropylene Separator for Lithium Ion Batteries
journal contributionposted on 18.01.2019, 00:00 by Fangxinyu Zeng, Ruizhang Xu, Lei Ye, Bijin Xiong, Jian Kang, Ming Xiang, Lu Li, Xingyue Sheng, Zengheng Hao
In this study, effects of heat setting treatment (pre-set heat setting ratio λ and heat setting temperature Tsetting) on the crystalline structures, orientation status, microporous structures, gas permeability, and electrochemical performance of the separators were studied in detail by means of differential scanning calorimetry (DSC), infrared dichroism, scanning electron microscope (SEM), ultrasmall angle X-ray scattering (U-SAXS), Gurley value test, and electrochemical measurement. It was found that with the decrease of λ or the increase of Tsetting, the melting temperature and degree of crystallinity change regularly and the orientation degree decreases gradually, resulting in small-sized micropores and lower porosity and S/V ratio of the separator. Finally, the gas permeability and ionic conductivity of the separator decreased while the dimensional stability increased. By tuning λ and Tsetting, the microstructure, morphology, and performance of the separators can be efficiently controlled.