es5b02072_si_001.pdf (951.97 kB)

Cadmium Stabilization Efficiency and Leachability by CdAl4O7 Monoclinic Structure

Download (951.97 kB)
journal contribution
posted on 15.12.2015, 00:00 by Minhua Su, Changzhong Liao, Kui-Hao Chuang, Ming-Yen Wey, Kaimin Shih
This study investigated the stabilization efficiencies of using an aluminum-rich precursor to incorporate simulated cadmium-bearing waste sludge and evaluated the leaching performance of the product phase. Cadmium oxide and γ-alumina mixtures with various Cd/Al molar ratios were fired at 800–1000 °C for 3 h. Cadmium could be crystallochemically incorporated by γ-alumina into CdAl4O7 monoclinic phase and the reaction was strongly controlled by the treatment temperature. The crystal structure details of CdAl4O7 were solved and refined with the Rietveld refinement method. According to the structural refinement results, the stabilization efficiencies were quantified and expressed as a transformation ratio (TR) with optimized processing parameters. The preferred treatment temperature was found to be 950 °C for mixtures with a Cd/Al molar ratio of 1/4, as its TR value indicated the cadmium incorporation was nearly completed after a 3 h treatment scheme. Constant-pH leaching tests (CPLT) were conducted by comparing the leachability of the CdO and CdAl4O7 phases in a pH 4.0 environment. A remarkable reduction in cadmium leachability could be achieved via monoclinic CdAl4O7 structure formation to effectively stabilize hazardous cadmium in the waste stream. The CPLT and X-ray photoelectron spectroscopy (XPS) results suggested incongruent dissolution behavior during the leaching of the CdAl4O7 phase.

History

Exports