A new highly expanded
polycarboxylate gel (EPCG) was accidentally
formed in a facile cross-linking copolymerization system. When used
as an adsorbent material, the EPCG could be quickly expanded 29.44
times in water to have a high permeability inside for realizing the
efficient adsorption toward Cu(II) from water. The adsorption capacity
of EPCG toward Cu(II) was 261.70 mg/g, which was higher than that
of all the selected existing adsorbents reported in recent years.
The adsorption rate of expanded EPCG was 3.61 times higher than that
of the previous polyantionic gel. Similarly, due to the high expansion
and high permeability of EPCG, the EPCG skeleton could be further
coated with an alkaline NaOH, forming a novel NaOH-coated EPCG material,
and its adsorption capacity toward Cu(II) was further improved to
333.21 mg/g compared to that of pure EPCG adsorbent. Moreover, the
EPCG wastes after adsorbing Cu(II) could be fully desorbed to be regenerated
for reuse. A total of 99.39% of the adsorbed Cu(II) was desorbed from
EPCG wastes to be recovered. The adsorption capacity of regenerated
EPCG reused for adsorbing Cu(II) was 259.05 mg/g, which was very near
that of the original EPCG. In addition, a series of simulation experiments
and instrumental analysis were adopted to confirm the new environmental
response effects as the key factors in the purification of Cu(II)-containing
wastewater, including “expansion-shrink,” “alkali-coating,”
and “acid-desorption” responses.