MCNTs@MnO2 Nanocomposite Cathode Integrated with Soluble O2‑Carrier Co-salen in Electrolyte for High-Performance Li–Air Batteries
journal contributionposted on 30.01.2017 by Xiaofei Hu, Jianbin Wang, Zifan Li, Jiaqi Wang, Duncan H. Gregory, Jun Chen
Any type of content formally published in an academic journal, usually following a peer-review process.
Li–air batteries (LABs) are promising because of their high energy density. However, LABs are troubled by large electrochemical polarization during discharge and charge, side reactions from both carbon cathode surface/peroxide product and electrolyte/superoxide intermediate, as well as the requirement for pure O2. Here we report the solution using multiwall carbon nanotubes (MCNTs)@MnO2 nanocomposite cathode integrated with N,N′-bis(salicylidene)ethylenediaminocobalt(II) (CoII-salen) in electrolyte for LABs. The advantage of such a combination is that on one hand, the coating layer of δ-MnO2 with about 2–3 nm on MCNTs@MnO2 nanocomposite catalyzes Li2O2 decomposition during charge and suppresses side reactions between product Li2O2 and MCNT surface. On the other hand, CoII-salen works as a mobile O2-carrier and accelerates Li2O2 formation through the reaciton of (CoIII-salen)2-O22– + 2Li+ + 2e– → 2CoII-salen + Li2O2. This reaction route overcomes the pure O2 limitation and avoids the formation of aggressive superoxide intermediate (O2– or LiO2), which easily attacks organic electrolyte. By using this double-catalyst system of Co-salen/MCNTs@MnO2, the lifetime of LABs is prolonged to 300 cycles at 500 mA g–1 (0.15 mA cm–2) with fixed capacity of 1000 mAh g–1 (0.30 mAh cm–2) in dry air (21% O2). Furthermore, we up-scale the capacity to 500 mAh (5.2 mAh cm–2) in pouch-type batteries (∼4 g, 325 Wh kg–1). This study should pave a new way for the design and construction of practical LABs.