American Chemical Society
Browse
am0c01405_si_001.pdf (210.03 kB)

Polarization-Sensitive Self-Powered Type-II GeSe/MoS2 van der Waals Heterojunction Photodetector

Download (210.03 kB)
journal contribution
posted on 2020-03-23, 22:43 authored by Ye Xin, Xinxin Wang, Zhuo Chen, Dieter Weller, Yingying Wang, Lijie Shi, Xiao Ma, Chunjie Ding, Wei Li, Shuai Guo, Ruibin Liu
Polarization-sensitive photodetectors are highly desirable for high-performance optical signal capture and stray light shielding in order to enhance the capability for detection and identification of targets in dark, haze, and other complex environments. Usually, filters and polarizers are utilized for conventional devices to achieve polarization-sensitive detection. Herein, to simplify the optical system, a two-dimensional self-powered polarization-sensitive photodetector is fabricated based on a stacked GeSe/MoS2 van der Waals (vdW) heterojunction which facilitates efficient separation and transportation of the photogenerated carriers because of type-II band alignment. Accordingly, a high-performance self-powered photodetector is achieved with merits of a very large on–off ratio photocurrent at zero bias of currently 104 and a high responsivity (Rλ) of 105 mA/W with an external quantum efficiency of 24.2%. Furthermore, a broad spectral photoresponse is extended from 380 to 1064 nm owing to the high absorption coefficient in a wide spectral region. One of the key benefits from these highly anisotropic orthorhombic structures of layered GeSe is self-powered polarization-sensitive detection with a peak/valley ratio of up to 2.95. This is realized irradiating with a 532 nm wavelength laser with which a maximum photoresponsivity of up to 590 mA/W is reached when the input polarization is parallel to the armchair direction. This work provides a facile route to fabricate self-powered polarization-sensitive photodetectors from GeSe/MoS2 vdW heterojunctions for integrated optoelectronic devices.

History