Spatially Heterogeneous Chlorine Incorporation in Organic–Inorganic Perovskite Solar Cells Yanqi Luo Shany Gamliel Sally Nijem Sigalit Aharon Martin Holt Benjamin Stripe Volker Rose Mariana I. Bertoni Lioz Etgar David P. Fenning 10.1021/acs.chemmater.6b02065.s001 https://acs.figshare.com/articles/journal_contribution/Spatially_Heterogeneous_Chlorine_Incorporation_in_Organic_Inorganic_Perovskite_Solar_Cells/3826359 Spatial heterogeneities in the chemical makeup of thin film photovoltaic devices are pivotal in determining device efficiency. We report the in-plane spatial distribution and degree of chlorine incorporation in organic–inorganic lead halide perovskite absorbers by means of nondestructive synchrotron-based nanoprobe X-ray fluorescence. The presence of chlorine is positively identified in CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> films synthesized with Cl-containing precursors and as an impurity in some films synthesized with nominally Cl-free precursors. The impurity may be introduced from precursors or as contaminants during film synthesis. The films formed from Cl-containing precursors contain roughly an order of magnitude higher amount of chlorine, with Cl:I values greater than 0.02 found whether Cl is present in either the organic or the inorganic precursor for both one- and two-step fabrication processes. A spatial variation in the Cl incorporation is observed within single particles and as well as between particles within a given film, and the standard deviation of the Cl:I ratio across the films is up to 30% of the average value. Understanding and controlling the heterogeneous distribution of chlorine in hybrid perovskite layers may offer a path to improve their photovoltaic performance. 2016-08-30 00:00:00 halide perovskite absorbers synchrotron-based nanoprobe X-ray fluorescence Spatially Heterogeneous Chlorine Incorporation Cl-containing precursors chlorine CH 3 NH 3 PbI 3 films film photovoltaic devices