Fabrication of MnO<i><sub>x</sub></i>–CeO<sub>2</sub>‑Based Catalytic Filters and Their Application in Low-Temperature Selective Catalytic Reduction of NO with NH<sub>3</sub> LiWeiman LiuHaidi ChenYunfa 2020 Catalytic filters (CFs) were fabricated by coating manganese and ceria oxides on mullite filters with a high porosity and a relatively low pressure drop and were used in the selective catalytic reduction of NO<i><sub>x</sub></i> by NH<sub>3</sub> (NH<sub>3</sub>-SCR). The influences of Mn/Ce ratios and loading weights were investigated. The CF with a Mn/Ce molar ratio of 6/4 can achieve >90% NO conversion in the temperature range of 120–250 °C, owing to abundant surface oxygen species, Ce<sup>3+</sup>, and Mn<sup>4+</sup> on it. NO conversion in the temperature range of 120–250 °C increased when the loading weight increased from 1.05 to 4.18%; however, when the loading weight was further increased, the catalytic activity remained unchanged. A possible growth mechanism of catalyst particles on mullite filters was proposed: the active species tended to disperse finely when the loading weight was lower than ∼4.00%; however, when the loading weight was more than 4.00%, the particles tended to grow at the conjunction of fibers, leading to a considerable pressure drop increase. The CFs showed a dust removal ability of more than 99% in a pilot experiment, which may provide a chance for the coprocessing of dust and NO<i><sub>x</sub></i> in practical use.